RooferLookup

Materials

Roofing materials: what a roofing license covers and which roofs stay cool

State license definitions list the materials a roofer is qualified to install, from asphalt and felt to tile, slate, metal and foam. The US Department of Energy's cool roof guidance then sorts the choices by slope: membranes, coatings and metal for low-slope roofs, and cool versions of shingle, tile and metal for steep ones.

The materials in the license definitions

California's C-39 class names the trade's materials outright: "asphaltum, pitch, tar, felt, glass fabric, urethane foam, metal roofing systems, flax, shakes, shingles, roof tile, slate or any other roofing, waterproofing, weatherproofing or membrane material(s) or a combination thereof".

Florida defines the roofing contractor by scope of work instead. The definition in section 489.105 takes in all kinds of roofing, waterproofing and coating, and adds related items: skylights, required roof-deck attachments, repair or replacement of wood roof sheathing or fascia during a reroof, and the evaluation and enhancement of roof-to-wall connections for structures with wood roof decking.

The practical point is that a roofing license is not tied to one product. The same license covers a shingle tear-off, a tile reset and a foam roof.

Slope sorts the options

The Department of Energy guide divides roofs at a pitch of 2:12. At or below that, a roof is low-slope.

RoofCool products the guide lists
Low-slope (pitch 2:12 or less)Thermoplastic membranes, elastomeric coatings, metal
SteepCool asphalt shingle, clay tile, concrete tile, metal

What "cool" means

Two measured properties, each on a scale of 0 to 1. Solar reflectance is the fraction of sunlight reflected. Thermal emittance is how efficiently the surface sheds the heat it has absorbed. Higher is cooler on both. The guide says a white or special "cool color" roof reflects up to 90 percent of the sunlight that hits it, and that white roofs are coolest.

The energy figures in the guide are for warm and hot climates:

Three cautions from the same guide

First, timing. "It is rarely economical to replace a mechanically sound roof just to increase its solar reflectance." Choose cool products when the roof is being replaced anyway. Second, aging. Shingles lose some reflectance over time, so compare products on their long-term values, not the day-one figure. Third, winter. A cool roof may increase the need for heating energy in cold months, which is why the savings are largest in hot and warm climates.

Ask the roofer to write the product line and color into the contract. Washington requires that for solicited roofing contracts, which must state "the grade, quality, or brand name of materials to be used".

Short answers

How much can a cool roof save?

The Department of Energy guide says a cool color roof on a home can cut cooling costs by at least 5 to 20 percent, with the greatest savings in hot and warm climates. It also notes a cool roof may raise heating needs in winter.

Do cool shingles cost more?

The Department of Energy guide says cool asphalt shingles cost about the same as conventional asphalt shingles.

Sources

  1. CSLB, C-39 Roofing Contractor classification
  2. Florida Statutes 489.105, Definitions
  3. US Department of Energy, Consumer Guide to Cool Roofs (August 2021)

All sources were read in November 2026.

Read next